The Linksys mounting bracket (MB100) is specifically designed for all Linksys SPA900 Series IP Phones enabling the phone to be mounted on a wall. The mounting bracket quickly attaches the phone in place by aligning the two holes located on the back of the phone and sliding it onto the cleats on the mounting bracket.

The durable all-steel construction of the mounting bracket is fashioned with a built-in tray permitting an optional Wi-Fi (WBP54G) or Power over Ethernet (POES5) dongle to be conveniently tucked out of the way behind the phone. Two screws secure the mounting bracket and phone on the wall.

The Linksys SPA932 32 Button Attendant Console for the SPA962 IP Phone is an ideal solution for small businesses wanting to simplify incoming call handling to quickly direct calls to the requested party and also monitor line status from a central location.

The SPA932 easily attaches to the SPA962 IP Phone providing 32 programmable speed-dial or direct station select (DSS) buttons, each button illuminating the line’s status (idle, ringing, busy, or null) via the busy lamp field (BLF). Incoming calls received can be immediately transferred to the proper location with only the push of a button assigned to the extension on the SPA932.

The modular design of the SPA932 permits up to two attendant consoles to be deployed for a total of 64 additional buttons offering an affordable solution that expands with the growth of your VoIP network. Installation and setup is just a matter of connecting the supplied bracket and cable to the SPA962 through which the SPA932 also utilizes the phone’s power supply --no additional power source is required.

The SPA9000 can support four (4) SIP compatible IP Phones, out-of-the-box. Up to sixteen (16) total IP Phones per SPA9000 can be supported with an easy to install license key upgrade part number SPA9000UPG.

The Linksys SPA9000-NA marries the rich feature set of high-end PBX telephone systems with the convenience and cost advantages of Voice over IP.

The Linksys SPA9000 has common voice system features such as an auto-attendant, shared line appearances, three way call conferencing, intercom, music on hold, call-forwarding and much more. The SPA9000 opens up access to the benefits of VoIP, including low cost long distance service, telephone number portability, and one network for both voice and data.

The SPA9000 is so easy to configure that a fully working system can be set up in minutes. New Linksys telephones are automatically detected and registered when they are connected to the SPA9000. The SPA9000 has an integrated web server that allow features to be configured using a web browser. The web server has multiple levels of password protected access to user and service level features.

With its integrated router, the SPA9000 can be either connected directly to the internet connection or to another router on your network. The SPA9000 has separate WAN and LAN Ethernet ports. The WAN connection can be connect through DHCP or a fixed IP address. The LAN port can assign IP addresses to IP Phones and computers using NAT and DHCP.

While the SPA9000 will work with any SIP compatible IP Phone, it is the ideal host for Linksys IP Phones, such as the SPA901, SPA921, SPA922, SPA941, SPA942, and SPA962. Powerful configuration capabilities enable the SPA9000 to support a greater set of advanced features with these IP Phones, such as shared line appearances, hunt groups, call transfer, call parking lot, and group paging.

With its two FXS ports, the SPA9000 can support traditional analog devices such as telephones, answering machines, FAX machines, and media adapters.

Linksys SPA9000-NA Product Features: The Linksys SPA9000 marries the rich feature set of high-end PBX telephone systems with the convenience and cost advantages of Voice over IP. It has common voice system features such as an auto-attendant, shared line appearances, three way call conferencing, intercom, music on hold, call-forwarding and much more. The SPA9000 opens up access to the benefits of VoIP, including low cost long distance service, telephone number portability, and one network for both voice and data.

The Linksys SPA9000 is so easy to configure that a fully working system can be set up in minutes. New Linksys branded telephones are automatically detected and registered when they are connected to the SPA9000. Note: other phones may work; however, they are not automatically detected or registered. The SPA9000 has an integrated web server that allow features to be configured using a web browser. The web server has multiple levels of password protected access to user and service level features. Service level settings may be locked by the Internet Telephone Service Provider to ensure they are not inadvertently corrupted. The Internet Telephone Service Provider also can remotely update the software and settings through a secure encrypted connection.

With its integrated router, the SPA9000 can be either connected directly to the internet connection or to another router on your network. The SPA9000 has separate WAN and LAN Ethernet ports. The WAN connection can be connect through DHCP or a fixed IP address. The LAN port can assign IP addresses to IP telephones and computers using NAT and DHCP.

While the SPA9000 will work with any SIP compatible IP telephone, it is the ideal host for Linksys business telephones, such as the SPA901, SPA921, SPA922, SPA941, and SPA942. Powerful configuration capabilities enable the SPA9000 to support a greater set of advanced features with these telephones, such as shared line appearances, hunt groups, call transfer, call parking lot, and group paging. With its two FXS ports, the SPA9000 can support traditional analog devices such as telephones, answering machines, FAX machines, and media adapters. The SPA9000 initially supports four (4) SIP compatible IP Phones and is upgradeable to sixteen (16) IP Phones total per SPA9000 with an easy to install license key upgrade.        

Linksys SPA VoIP Phone Comparison Chart